> For the complete documentation index, see [llms.txt](https://monasheng.gitbook.io/zerotohero/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://monasheng.gitbook.io/zerotohero/3d-printing-zero-to-hero/module-capstone-project/printing-tasks.md).

# Printing Tasks

## Task 4 - Complete a 3D Printing Induction

* [x] Speak to your demonstrator and/or the D\&B Staff for an induction to the FDM 3D Printing spaces in the Design & Build Studios.

## Task 5 - Upload Your Sliced `.gcode` File to a USB Stick

* [x] Borrow a *PRUSA* USB stick from the wall in the Design & Build Studios and load your sliced `.gcode` file, ready for printing.

## Task 6 - Print Your Part!

* [x] Use the PRUSA printer that corresponds to your choice of USB and load your part for printing.
* [x] Kill some time while your part prints. If you've met the project constraints, this will be $$<45;\text{min}$$.
* [x] Carefully remove your part from the print bed, and return the printer and the USB stick to the state you found them.